1. After the die setting of the cross-cutting machine is completed, place the material to be cut on the rubber plate, then place the die on the material, and then push the feeding plate into the cutting area.
2. Press the cutting switch 12 of the cross-cutting machine with both hands. At this time, the cutting platen will drop and pressurize on the die, and after the die cuts the material, it will automatically return to the position before starting and stop.
3. When punching the material with the cross-cutting machine, if it is found that the material is not cut, adjust the 03 cutting depth controller, and rotate the "pressure system" clockwise and counterclockwise; if the die is pressed too deep into the rubber plate, the "Pressure system" rotates counterclockwise, the longer the adjustment time, the deeper the cutting, try to adjust until the die is slightly pressed into the rubber plate.
4. Pull the feeding plate out of the cutting area, take out the cut material, and complete the blanking process.
